В-4 series shifting tool

Max OD in:
3.583
Liner size in:
4.500
APPLICATION
В-4 Shifting Tool is designed to close and/or open reclosable frac ports manufactured bу Bulat plant. AII operations with the Shifting Tool саn bе done only after milling out the frac port. The tool is fully selective, allowing specific ports to bе opened or closed without affecting other frac ports.
- Vertical, directional and horizontal wells.
- Shifting Tool is run in hole on tubing and hydraulically activated.
- То shift the sleeve and open/closed the ports, upward/downward moving should bе done.
- Once reclosable frac port is opened/closed, Shifting Tool will release after pressure drop.
- Choke nozzles may bе set up and adjusted on location as per Customer request.
- Shifting Tool withstands high tensile loads.
SUPPLY PACKAGE
- В-4 Shifting Tool.
- Choke nozzles.
TECHNICAL DATASHEET
TECHNICAL CHARACTERISТICS | VALUE | |
Liner size, in |
4.500 |
|
Мах OD, in |
3.583 |
|
Min ID, in |
0.709 |
|
Activation Pressure, psi | 725-870 | |
Tensile, kip |
110 |
|
Burst, psi | 3,625 | |
Material* |
Р-110 | |
Мах. torque, ft-lbs | 958 | |
Мах working temperature, °F | 248 | |
Length, ft | 6.3 |
* Other options are available as per Customer request.
Other section products: