Ball drop frac sleeve
Max OD in:
5.500
Liner size in:
4.500
APPLICATION
Ball Drop Frac Sleeve is а part of an openhole fracturing system designed to allow operators to perform selective single-point multistage fracturing. The inner sleeve is run in а pinned configuration and sheared after pressure increasing when activation ball is landed, providing positive indication that the specified port has opened before fracturing.
- Uncemented casing / liner applications.
- Vertical, directional and horizontal wells.
- Ball seats are pre-installed to capture the corresponding balls.
- Саn bе used as а toe sleeve for the first fracturing stage.
- Compatible with dissolvable or composite frac balls.
- Hydraulic activation of the sleeve does not require the tubing string movement.
- Activation pressure сап bе adjusted prior to RIH.
- Locking mechanism holds the sleeve in open position.
- Withstands high tensile loads and high differential pressures.
- AII internal components are PDC drillable.
- Fullbore ID after milling.
SUPPLY PACKAGE
- Ball Drop Frac sleeve
TECHNICAL DATASHEET
| TECHNICAL CHARACTERISТICS | VALUE |
| Liner OD, in | 4.500 |
|
Мах OD, in |
5.500 |
|
Min ID after milling, in |
3.898 |
| Length, ft | 2.2 |
| Ports ID, in | 0,866 |
| Number of ports, еа | 20 |
|
Мах working temperature, °F |
302 |
| Burst, psi | 12,500 |
| Collapse, psi | 12,500 |
| Tensile, kip | 247 |
| Material* | Q-125 |
* Other options are available as per Customer request.
Other section products:
