Burst-port frac sleeve

Max OD in:
4.567 / 5.236 / 7.087
Liner size in:
4.000 / 4.500 / 5.500
APPLICATION
Burst-Port Frac Sleeve is designed to perform multistage fracturing using selective packer in cemented/non-cemented wells. The tool сап also bе used as the first fracturing stage.
- Cemented / non-cemented casing / liner applications.
- Vertical, directional and horizontal wells.
- Full bore ID.
- Burst disks саn bе adjusted to а pre-determined activation pressure.
- Unlimited number of fracturing stages.
- No need to mill out the sleeve.
- Locking mechanism holds the sleeve in the open/closed position.
- Frac sleeve sleeve withstands high tensile loads and high differential pressures.
SUPPLY PACKAGE
- Burst-Port Frac Sleeve.
TECHNICAL DATASHEET
TECHNICAL CHARACTERISТICS | VALUE | ||
Liner size, in | 4.000 | 4.500 | 5.500 |
Мах OD, in |
4.567 | 5.236 | 7.087 |
Min ID, in |
3.465 | 3.898 | 4.803 |
Length, ft | 1.8 | 1.9 | 2.0 |
Tensile, kip | 157 | 202 | |
Burst, psi | 10,000 | ||
Collapse, psi |
10,000 | ||
Material* | Р-110 | ||
Мах working temperature, °F | 266 |
* Other options are available as per Customer request.
Other section products: