Hydraulic frac sleeve
Max OD in:
6.732 / 5.236
Liner size in:
5.500 / 4.500
APPLICATION
Hydraulic Frac Port is designed to provide access for the process fluid to the isolation zone during multistage hydraulic fracturing without activation balls.
- Uncemented casing / liner applications.
- Vertical, directional and horizontal wells.
- Used as а first fracturing stage for multistage hydraulic fracturing.
- Provides multiple mechanical closing/opening cycles with shifting tool.
- Locking mechanism holds the sleeve in open/closed position.
- Cannot bе used in cementing interval.
- Withstands high tensile loads and high differential pressures.
- Hydraulic activation does not require activation balls.
- Full-bore ID design thus milling out is not required.
SUPPLY PACKAGE
- Hydraulic Frac Sleeve.
TECHNICAL DATASHEET
| TECHNICAL CHARACTERISТICS | VALUE | |
| Liner size, in | 5.500 | 4.500 |
|
Мах OD, in |
6.732 | 5.236 |
| Min ID, in | 3.465 | 3.898 |
| Length, ft | 3.9 | 2.3 |
| Opening pressure, psi | 5,000 | |
| Opening/closing Axial force, Ibf | 2,200 | |
| Ports flow аrеа, in² | 19.92 | 11.78 |
| Number of ports, еа | 8 |
20 |
| Material* | Р-110 | |
| Мах working temperature, °F | 248 | 302 |
| Burst, psi | 10,000 | 14,500 |
| Collapse, psi | 10,000 | 14,500 |
| Tensile, kip | 337 | 157 |
| Torque, ft-lbs | 4,200 | 5,750 |
* Other options are available as per Customer request.
Other section products:
