Ball drop frac port
Max OD in:
4.646 / 3.465 / 3.465 / 3.465
Liner size in:
4.000 / 4.000 / 5.500 / 4.500 / 5.750
APPLICATION
Ball Drop Frac Sleeve is а part of an openhole fracturing system designed to allow operators to perform selective single-point multistage fracturing. The inner sleeve is run in а pinned configuration and sheared after pressure increasing when activation ball is landed, providing positive indication that the specified port has opened before fracturing.
- Uncemented casing / liner applications.
- Vertical, directional and horizontal wells
- Ball seats аге pre-installed to capture the corresponding balls.
- Allows to perform up to 21 stages of multistage fracturing.
- Compatible with dissolvable оr composite frac balls.
- Hydraulic activation of the sleeve does not require the tublng string movement.
- Activation pressure саn bе adjusted prior to RIH.
- AII internal components аге РОС drillable.
- Fullbore ID after milling.
- Withstands high tensile loads and high differential pressures
SUPPLY PACKAGE
- Ball Drop Frac Port.
TECHNICAL DATASHEET
| TECHNICAL CHARACTERISТICS | VALUE | |||
| Liner size, in | 4.000 | 4.000 / 5.500 | 4.500 | 5.750 |
|
Мах OD, in |
4.646 | 3.465 | 3.465 | 3.465 |
|
Min ID, in |
3.465 | 3.900 | 5.080 | |
| Actuation pressure, psi | 2,300 | 2,900 | ||
| Ports flow агеа, in | 10.65 | 10.65 | 16.53 | 24.19 |
| Number of ports, еа | 6 | |||
|
Burst, psi |
10,000 | |||
| Collapse, psi | 10,000 | |||
|
Tensile, kip |
157 | 157 | 202 | 315 |
| Material* | Р-110 | |||
| Мах working temperature, °F | 248 | |||
| Length, in | 2.1 | 2.3 | ||
* Other options аге availaЫe as рег Customer request.
Other section products:
