Formation isolation valve
Length, ft:
7, 9 5/8
Working temperature, max:
302 °F
APPLICATION
The Formation Isolation Valve is used to isolate the formation from above and below. The tool prevents formation damage and provides well control. The tool is used in wells with liners of the corresponding size.
- Formation Isolation Valve is usually installed below the packer to provide reliable formation isolation;
- The tool is opened or closed with a mechanical shifting tool;
- The tool does not require any additional operations during liner running;
- The valve is opened mechanically using a special shifting tool that is pulled from the well with the running tool after liner hanger activation;
- The tool can be operated in drilling fluid, cement slurry, fluids with chemical agents, formation brine, oil and gas at temperature up to 302 °F;
- The tool is pressure-tested at the manufacturer site. Additional pressure test before use is not required.
TECHNICAL DATASHEET
Casing size, in | 7 | 9 5/8 |
Outer diameter, in | 7,63 | 8,00 |
Length, in | 192,72 | 192,72 |
Max working temperature, °F | 302 | 302 |
Working pressure, psi | 5076 | 5076 |
Tensile strength, lbs | 262349 | 262349 |
Burst pressure, psi | 8499 | 8499 |
Collapse pressure, psi | 6309 | 6309 |
*Thread type, metallurgy and elastomers are as per Customer`s requirements